O · Ø0.8–4.0 · St1kp–St3 · GOST 3282
Annealed tying wire
Soft heat-treated wire 0.8–4 mm for tying reinforcement cages and mesh
1Ts · 2Ts · Ø0.5–6.0 · GOST 3282 · ASTM A641
Galvanized wire
Low-carbon wire 0.5–6 mm with zinc coating for outdoor work and fencing
- GOST 3282-74
- GB/T 343-2012
- ASTM A641/A641M
- EN 10244-2
- St2kp
- St3ps
- Q195
- Q235
- SAE 1008
Section
Key parameters
- Diameter
- 0.5–6.0 mm
- Coating
- zinc, class 1Ts or 2Ts per GOST 3282
- Galvanizing method
- hot-dip, electrolytic
- Condition
- O — heat treated (annealed); without heat treatment to specification
- Steel grade
- St2kp, St3ps / Q195, Q235
- Delivery form
- coils, bundles, spools
Sizes and weight
Pick a size in the table: each row has a quantity field in tonnes and an “Add to specification” button. Rows from several items go out as one request.
Calculate for your volume
The same formula as the table below: metres to tonnes and tonnes to metres.
—kg per metre
—total, t
—metres per tonne
Formula
| Ø, mm | Weight, kg/m | Metres per tonne | Add to specification |
|---|---|---|---|
| 0.5 | Weight, kg/m0.002 | Metres per tonne648 784 | Add to specification |
| 0.8 | Weight, kg/m0.004 | Metres per tonne253 431 | Add to specification |
| 1 | Weight, kg/m0.006 | Metres per tonne162 196 | Add to specification |
| 1.2 | Weight, kg/m0.009 | Metres per tonne112 636 | Add to specification |
| 1.6 | Weight, kg/m0.016 | Metres per tonne63 358 | Add to specification |
| 2 | Weight, kg/m0.025 | Metres per tonne40 549 | Add to specification |
| 2.5 | Weight, kg/m0.039 | Metres per tonne25 951 | Add to specification |
| 3 | Weight, kg/m0.055 | Metres per tonne18 022 | Add to specification |
| 4 | Weight, kg/m0.099 | Metres per tonne10 137 | Add to specification |
| 5 | Weight, kg/m0.154 | Metres per tonne6 488 | Add to specification |
| 6 | Weight, kg/m0.222 | Metres per tonne4 505 | Add to specification |
Wire mass per metre is 0.006165·d², where d is the diameter in mm.
Theoretical weight at steel density 7.85 g/cm³. Actual batch weight is by scale and mill certificate.
Description
Galvanized wire is the same general-purpose low-carbon wire to GOST 3282-74, but with a zinc coating of class 1Ts or 2Ts; Chinese mills produce it to GB/T 343-2012, and for export orders to ASTM A641/A641M and EN 10244-2. The wire is drawn from Q195, Q235 or St2kp, St3 wire rod and galvanized either by hot-dipping in a bath of molten zinc or electrolytically. Hot-dip galvanizing gives a thick layer for outdoor use; electrolytic plating gives a thin, even layer for indoor work and woven products.
Details
Coating classes differ by zinc weight per square metre of surface: 2Ts to GOST 3282 carries more zinc than 1Ts; ASTM A641 sets the same division as Class 1 and Class 3, EN 10244-2 as classes A–D. Supplied in the heat-treated (O) and non-heat-treated condition: annealed wire is softer and goes to tying and weaving, unannealed wire is stiffer and holds tension in fencing and guy wires.
During inspection at the mill the bureau measures the diameter with a micrometer over the coating and without it, checks the zinc weight by the gravimetric method on samples from different coils and coating adhesion by wrapping around a mandrel: the zinc must not flake or crack. The mill test certificate (MTC) is checked against the wire rod heat, chemical composition, coating class and zinc weight; the tags on the coils, the marking and the packaging protecting the coating from white rust in transit are checked.
Applications
- fencing, guy wires, fixing chain-link and welded mesh to posts
- greenhouse complexes and trellises for orchards and vineyards
- overhead communication lines and earthing leads
- weaving chain-link and producing galvanized mesh
- cable fixing, hangers, rope and rigging products
Packing and shipment
Coils tied in three places, covered with moisture-resistant paper and film, on pallets; coil weight is agreed in the specification. A mill tag on each coil with diameter, coating class and heat.
Grade equivalents
Equivalents are the nearest, not identical: the exact grade and standard are written into the contract.
| GOST | GB (China) | ASTM | EN | Note |
|---|---|---|---|---|
| St1kp (GOST 380) | GB (China)Q195 | ASTMAISI 1006 | ENC4D (EN 10016-2) | NoteNearest equivalent by carbon content; wire rod steel for soft tying wire |
| St2kp, St3kp (GOST 380) | GB (China)Q215, Q235 | ASTMAISI 1008 | ENC7D (EN 10016-2) | NoteNearest equivalent; for galvanized wire and chain-link mesh. Q235 is stiffer than St2kp; the grade is fixed in the specification |
| O wire (annealed, GOST 3282) | GB (China)退火钢丝 (GB/T 343) | ASTMASTM A853 annealed | ENEN 10218-2 | NoteEquivalence by delivery condition, not by steel grade: EN 10218-2 sets only diameter tolerances |
| 1Ts, 2Ts (GOST 3282) | GB (China)热镀锌 / 电镀锌 (GB/T 343) | ASTMASTM A641 Class 1, Class 3 | ENEN 10244-2 class A–D | NoteClasses are defined by zinc weight per m² and do not match directly; the specification states the coating weight in g/m² |
| VR-1 (GOST 6727) | GB (China)CRB550 (GB/T 13788) | ASTMASTM A1064 D-wire | ENB500A (EN 10080) | NoteNearest equivalent: VR-1 is cold-drawn with indentations, CRB550 is cold-rolled ribbed; strength is close, the profile differs |
| A500C (GOST 34028) | GB (China)HRB400E, HRB500E | ASTMGrade 60 (ASTM A615) | ENB500B (EN 10080) | NoteNearest equivalent by yield strength is HRB500E (500 N/mm²); HRB400E is lower (400 N/mm²); for reinforcing mesh the specification states the class to GOST 34028 and the grade to GB/T 1499.2 |
Equivalents are the closest match, not identical: chemistry and tolerances differ between standards. The exact grade and standard are written into the contract.
The batch is checked against the order at the mill before shipment: sizes, markings, heat numbers on the certificate and tags, packing
Documents
What arrives with the steel
01
Mill test certificate (MTC)
Heat number, chemical composition, mechanical properties and standard for every heat in the batch.
02
Photo-documented inspection report
Measurements, markings, packing, weighing and bundle numbers, drawn up at the mill before shipment.
03
Specification and packing list
Items, sizes, quantities and mass by bundle: what the warehouse acceptance is checked against.
04
Certificate of origin
Confirms the mill and country of manufacture for customs clearance.
Related items
Mesh 20–60 · Ø1.4–3.0 · black · galvanized · GOST 5336
Chain-link mesh
Single-woven mesh with 20–60 mm openings from black and galvanized wire in rolls
Buyer questions
How to read a mill test certificate for wire and mesh
The mill test certificate (MTC) states the standard, steel grade, wire rod heat number, chemical composition, diameter, tensile strength, elongation and number of reverse bends; for galvanized wire, the zinc weight per m². The bureau checks the heat number against the tag on the coil or mesh bundle and against the marking on the packaging: a certificate without a matching heat is not accepted.
How tying wire differs from galvanized wire and which to choose
Tying wire is annealed (O), soft, bends by hand and does not spring back; it is used for tying reinforcement cages and stays inside the concrete, where corrosion is not critical. Galvanized wire is usually unannealed, stiffer, with a zinc coating of class 1Ts or 2Ts; it works outdoors: fencing, guy wires, fixing mesh. Galvanized wire is not needed for tying cages, and black wire is not suitable for outdoor use.
How the tonnage of wire and mesh is calculated
Wire is calculated by weight: the weight per linear metre equals 0.006165·d², where d is the diameter in millimetres; the length per coil and per tonne follows from this. Welded mesh is calculated by weight per square metre: twice the number of wires per metre multiplied by the weight per metre of wire, plus the overhangs at the sheet edges. Chain-link mesh is counted in rolls of a given width and length; the roll weight is stated in the mill certificate.
What is checked during inspection at the mill
Wire diameter with a micrometer in two perpendicular directions on several coils of the batch, ovality, absence of scale and cracks; for galvanized wire, zinc weight by the gravimetric method and coating adhesion by wrapping around a mandrel. For welded mesh: wire diameter, mesh opening, sheet dimensions, shear strength of weld joints, number of unwelded joints. The certificate is checked against the heat, along with marking, tag and packaging; an inspection report with photographs is drawn up.
How a batch is formed and whether there is a minimum quantity
The batch is sized to your quantity; send a specification with diameters, mesh openings, sheet or roll dimensions and coating requirements. Wire and mesh of different sizes are combined in one container so that the load is complete; the weight of coil, roll and bundle is agreed with the mill when the order is placed.
Price request
Send your specification and we will quote your batch
Price depends on grade, size, tonnage and delivery terms on the day of contract.
Request received