09G2S · Q355B · t 2–50 · 1 500×6 000 · GOST 19281
Plate 09G2S
Low-alloy hot-rolled plate of increased strength for structures operating at low temperatures
St3sp/ps · Q235B · t 1.5–100 · 1 500×6 000 · GOST 19903
Hot-rolled plate St3
Hot-rolled plate of ordinary-quality carbon steel for steel structures, tanks and machine building
- GOST 19903-2015
- GOST 14637-89
- GOST 16523-97
- GOST 380-2005
- GB/T 3274-2017
- GB/T 709-2019
- GB/T 700-2006
- ASTM A36/A36M
- EN 10025-2:2019
- St3sp
- St3ps
- Q235B
- S235JR
- A36
Section
Key parameters
- Thickness
- 1.5–100 mm; other thicknesses — to specification
- Width
- 1 000, 1 250, 1 500, 2 000, 2 500 mm
- Length
- 2 000–12 000 mm; formats 1 500×6 000 and 2 000×6 000
- Steel grade
- St3sp, St3ps; Q235B; S235JR
- Category
- per GOST 14637 — to specification; for welded structures — category 5
- Edge
- trimmed edge (O) or mill edge (NO)
- Surface
- hot-rolled with mill scale; pickling or shot blasting — to specification
Sizes and weight
Pick a size in the table: each row has a quantity field in tonnes and an “Add to specification” button. Rows from several items go out as one request.
Calculate for your volume
The same formula as the table below: metres to tonnes and tonnes to metres.
—kg per metre
—total, t
—metres per tonne
Formula
| t, mm | Weight, kg/m² | Sheet 1 500×6 000, kg | Add to specification |
|---|---|---|---|
| 1.5 | Weight, kg/m²11.8 | Sheet 1 500×6 000, kg106.0 | Add to specification |
| 2 | Weight, kg/m²15.7 | Sheet 1 500×6 000, kg141.3 | Add to specification |
| 3 | Weight, kg/m²23.5 | Sheet 1 500×6 000, kg211.9 | Add to specification |
| 4 | Weight, kg/m²31.4 | Sheet 1 500×6 000, kg282.6 | Add to specification |
| 5 | Weight, kg/m²39.3 | Sheet 1 500×6 000, kg353.3 | Add to specification |
| 6 | Weight, kg/m²47.1 | Sheet 1 500×6 000, kg423.9 | Add to specification |
| 8 | Weight, kg/m²62.8 | Sheet 1 500×6 000, kg565.2 | Add to specification |
| 10 | Weight, kg/m²78.5 | Sheet 1 500×6 000, kg706.5 | Add to specification |
| 12 | Weight, kg/m²94.2 | Sheet 1 500×6 000, kg847.8 | Add to specification |
| 14 | Weight, kg/m²109.9 | Sheet 1 500×6 000, kg989.1 | Add to specification |
| 16 | Weight, kg/m²125.6 | Sheet 1 500×6 000, kg1 130 | Add to specification |
| 20 | Weight, kg/m²157.0 | Sheet 1 500×6 000, kg1 413 | Add to specification |
| 25 | Weight, kg/m²196.3 | Sheet 1 500×6 000, kg1 766 | Add to specification |
| 30 | Weight, kg/m²235.5 | Sheet 1 500×6 000, kg2 120 | Add to specification |
| 40 | Weight, kg/m²314.0 | Sheet 1 500×6 000, kg2 826 | Add to specification |
| 50 | Weight, kg/m²392.5 | Sheet 1 500×6 000, kg3 533 | Add to specification |
Plate mass per m² is 7.85·t, where t is the thickness in mm; sheet mass is for the 1 500×6 000 mm format.
Theoretical weight at steel density 7.85 g/cm³. Actual batch weight is by scale and mill certificate.
Description
Hot-rolled St3 plate is the base item of flat products: ordinary-quality carbon steel to GOST 380-2005, dimensions to GOST 19903-2015, technical requirements to GOST 14637-89 for heavy plate and GOST 16523-97 for thin sheet. Sheet up to 12 mm thick is rolled by mills in China on continuous wide-strip mills and cut to length from coil; heavy plate from 8 mm and up is rolled on reversing plate mills from a slab. After rolling the surface carries mill scale; the edge is trimmed or untrimmed — this is stated in the specification.
Details
St3sp is killed steel, fully deoxidised; St3ps is semi-killed. For welded structures and service at sub-zero temperatures St3sp category 5 to GOST 14637 is usually specified — with an impact test at −20 °C. The Chinese equivalent is Q235B to GB/T 700-2006 and GB/T 3274-2017 with a yield strength of 235 MPa minimum and an impact test at +20 °C; for export, mills certify the plate as S235JR to EN 10025-2 or A36 to ASTM. We fix the grade and the certificate standard in the specification before the order is placed.
At the mill before shipment the bureau's inspector measures thickness with a micrometer at several points of the sample sheets and checks it against the tolerance of GOST 19903 or GB/T 709, checks width, length and squareness of cut with a tape, flatness with a straightedge and feeler gauge, and examines the surface for laminations, tears, laps and rolled-in scale. The mill test certificate (MTC) is checked against the bundle tag and the sheet marking by heat number, and the chemical composition and mechanical properties against the limits of the standard. Packaging and bundle strapping are checked. The report with photographs is handed to you before shipment.
Applications
- welded steel structures, columns, beams and bracing of buildings
- tanks, vessels and hoppers not under pressure
- machine body parts and repair work
- guard and support structures of trestles and platforms
- stock for plasma and oxy-fuel cutting
- base for chequered plate and cold-formed sections
Packing and shipment
Bundles on timber bearers, strapped with steel band, mill tag with grade, heat, thickness and batch number; bundle weight to suit the lifting capacity of your crane.
Grade equivalents
Equivalents are the nearest, not identical: the exact grade and standard are written into the contract.
| GOST | GB (China) | ASTM | EN | Note |
|---|---|---|---|---|
| St3sp / St3ps | GB (China)Q235B | ASTMA36 | ENS235JR | NoteNearest equivalents. Q235B and S235JR specify impact toughness at +20 °C, GOST 14637 by category; A36 has a higher yield strength, 250 MPa. |
| 09G2S | GB (China)Q355B (Q345B before 2018) | ASTMA572 Grade 50 | ENS355JR / S355J2 | NoteNearest equivalents by strength. The 09G2S category for impact toughness at −40 or −70 °C is specified separately; Q355B is tested at +20 °C. |
| 08ps | GB (China)DC01 | ASTMA1008 CS Type B | ENDC01 | NoteSPCC to JIS G3141 is the same class of general-purpose cold-rolled low-carbon steel. |
| 08ps to GOST 14918 | GB (China)DX51D+Z | ASTMA653 CS Type B | ENDX51D+Z | NoteThe DX51D+Z designation in GB/T 2518 matches EN 10346. Zinc coating weight (Z100–Z275) is specified separately from the grade. |
| GOST 34180 based on 08ps | GB (China)TDC51D+Z | ASTMA755 based on A653 | ENDX51D+Z to EN 10169 | NoteThe grade describes the steel substrate and the zinc. Type and thickness of the polymer layer, RAL colour and environment class are set by the specification. |
| 08Kh18N10 | GB (China)06Cr19Ni10 | ASTM304 | EN1.4301 (X5CrNi18-10) | Note12Kh18N10T is the equivalent of titanium-stabilised grade 321, not of 304. |
| 03Kh18N11 | GB (China)022Cr19Ni10 | ASTM304L | EN1.4307 (X2CrNi18-9) | NoteLow-carbon version of 304 (carbon up to 0.03 %) for welded structures without subsequent heat treatment. |
| 03Kh17N14M3 | GB (China)022Cr17Ni12Mo2 | ASTM316L | EN1.4404 (X2CrNiMo17-12-2) | NoteMolybdenum 2–3 % to ASTM A240. Mills in China certify to ASTM or EN; the GOST grade is entered in the MTC on request as an equivalent. |
Equivalents are the closest match, not identical: chemistry and tolerances differ between standards. The exact grade and standard are written into the contract.
The batch is checked against the order at the mill before shipment: sizes, markings, heat numbers on the certificate and tags, packing
Documents
What arrives with the steel
01
Mill test certificate (MTC)
Heat number, chemical composition, mechanical properties and standard for every heat in the batch.
02
Photo-documented inspection report
Measurements, markings, packing, weighing and bundle numbers, drawn up at the mill before shipment.
03
Specification and packing list
Items, sizes, quantities and mass by bundle: what the warehouse acceptance is checked against.
04
Certificate of origin
Confirms the mill and country of manufacture for customs clearance.
Related items
St3 · Q235B · teardrop / diamond · t 2.5–12 · 1 500×6 000 · GOST 8568
Chequered plate
Hot-rolled plate with lentil or diamond pattern for platforms, stair treads and floors with a non-slip surface
08ps · DC01 · SPCC · t 0.5–3 · 1 250×2 500 · GOST 19904
Cold-rolled sheet 08ps
Cold-rolled low-carbon steel sheet with close thickness tolerance and clean surface for stamping, bending and painting
Buyer questions
How to read a mill test certificate for sheet
In the certificate (MTC) the mill states the standard and grade, heat number, thickness and format, chemical composition of the heat, mechanical test results and batch number. We check the heat number against the tag on every bundle and the marking on the sheets, and the composition and properties against the requirements of the standard named in the specification. A certificate without a heat number, or with a composition outside the limits of the standard, is grounds for not accepting the batch.
How St3sp differs from St3ps and from Q235B
St3sp is killed steel, fully deoxidised; St3ps is semi-killed. For welded structures and service at sub-zero temperatures St3sp with a category to GOST 14637 is usually specified. Q235B is the Chinese grade of the same class with a yield strength of 235 MPa minimum and an impact test at +20 °C. A mill in China issues the certificate to GB/T 700 or, under contract, rolls the plate to GOST requirements and states this in the MTC.
How sheet tonnage is calculated
Theoretical weight per square metre is 7.85 kg for every millimetre of thickness; the weight of a sheet is thickness multiplied by area and by 7.85. Actual weight differs because of the thickness tolerance: a minus tolerance makes the batch lighter than theoretical. In the specification we fix which weight the batch is settled by — theoretical or actual by weighing at the mill — and the same weight goes into the packing list.
What is checked during inspection at the mill
Thickness with a micrometer at several points of every sample sheet, width and length with a tape, flatness and squareness of cut, surface for laminations, laps and scale, marking and tags, certificate by heat and composition, packaging. For coated products — zinc or polymer thickness with a coating gauge; for stainless steel — a composition check with a portable analyser. The result is a report with photographs before shipment.
How a batch is calculated
The batch is calculated for your volume — send the specification: grade and standard, thickness, sheet format, coating and surface, quantity in sheets or tonnes, certificate requirements. From the specification we find a producing mill, agree the rolling and packaging terms and reply with a calculation.
Price request
Send your specification and we will quote your batch
Price depends on grade, size, tonnage and delivery terms on the day of contract.
Request received