A400 (A-III) · Ø6–40 · 25G2S, 35GS · GOST 5781-82
A400 (A-III) rebar
Hot-rolled grade A-III rebar to GOST 5781-82 from steel 25G2S and 35GS, herringbone rib pattern, Ø6–40 mm
A500C · Ø6–40 · 6–12 m · GOST 34028-2016
A500C rebar
Weldable grade 500 rebar to GOST 34028-2016, crescent rib pattern, Ø6–40 mm, from mills in China
- GOST 34028-2016
- A500C
Section
Key parameters
- Standard
- GOST 34028-2016
- Grade
- A500C
- Diameter
- 6–40 mm
- Length
- 6–12 m fixed length, 11.7 m; small diameters — in coils
- Yield strength
- from 500 N/mm²
- Tensile strength
- from 600 N/mm²
- Rib pattern
- crescent
- Weldability
- unrestricted, Ceq ≤ 0.52 %
Sizes and weight
Pick a size in the table: each row has a quantity field in tonnes and an “Add to specification” button. Rows from several items go out as one request.
Calculate for your volume
The same formula as the table below: metres to tonnes and tonnes to metres.
—kg per metre
—total, t
—metres per tonne
Formula
| Ø, mm | Weight, kg/m | Metres per tonne | Mass of an 11.7 m bar, kg | Add to specification |
|---|---|---|---|---|
| 6 | Weight, kg/m0.222 | Metres per tonne4 505 | Mass of an 11.7 m bar, kg2.60 | Add to specification |
| 8 | Weight, kg/m0.395 | Metres per tonne2 534 | Mass of an 11.7 m bar, kg4.62 | Add to specification |
| 10 | Weight, kg/m0.617 | Metres per tonne1 622 | Mass of an 11.7 m bar, kg7.21 | Add to specification |
| 12 | Weight, kg/m0.888 | Metres per tonne1 126 | Mass of an 11.7 m bar, kg10.4 | Add to specification |
| 14 | Weight, kg/m1.21 | Metres per tonne827.5 | Mass of an 11.7 m bar, kg14.1 | Add to specification |
| 16 | Weight, kg/m1.58 | Metres per tonne633.6 | Mass of an 11.7 m bar, kg18.5 | Add to specification |
| 18 | Weight, kg/m2.00 | Metres per tonne500.6 | Mass of an 11.7 m bar, kg23.4 | Add to specification |
| 20 | Weight, kg/m2.47 | Metres per tonne405.5 | Mass of an 11.7 m bar, kg28.9 | Add to specification |
| 22 | Weight, kg/m2.98 | Metres per tonne335.1 | Mass of an 11.7 m bar, kg34.9 | Add to specification |
| 25 | Weight, kg/m3.85 | Metres per tonne259.5 | Mass of an 11.7 m bar, kg45.1 | Add to specification |
| 28 | Weight, kg/m4.83 | Metres per tonne206.9 | Mass of an 11.7 m bar, kg56.6 | Add to specification |
| 32 | Weight, kg/m6.31 | Metres per tonne158.4 | Mass of an 11.7 m bar, kg73.9 | Add to specification |
| 36 | Weight, kg/m7.99 | Metres per tonne125.2 | Mass of an 11.7 m bar, kg93.5 | Add to specification |
| 40 | Weight, kg/m9.86 | Metres per tonne101.4 | Mass of an 11.7 m bar, kg115.4 | Add to specification |
Mass per metre is 0.006165·d² by nominal diameter, GOST 34028-2016; the standard bar length is 11.7 m.
Theoretical weight at steel density 7.85 g/cm³. Actual batch weight is by scale and mill certificate.
Description
A500C is deformed reinforcing bar with a yield strength of 500 N/mm² or more under GOST 34028-2016. The C suffix denotes weldability: the bars accept resistance and arc welding without restrictions on the welding procedure, and the carbon equivalent of the steel does not exceed 0.52 %. Tensile strength is 600 N/mm² or more, elongation δ5 is 14 % or more.
Details
It is as a rule rolled from low-carbon steel with thermomechanical strengthening: after rolling the bar passes through accelerated cooling with self-tempering, the surface layer gains strength while the core remains ductile. The rib pattern is crescent — the transverse ribs do not join the longitudinal ribs, which distinguishes A500C from the herringbone pattern of A400 under GOST 5781. The grade, diameter and mill designation are rolled into the surface of the bar.
During inspection at the mill the bureau checks the mill test certificate (MTC) for every heat — chemical composition, carbon equivalent, tensile and bend test results — against the bundle tag and the marking on the bar. The core diameter and rib height are measured with a calliper and a micrometer, the weight of a one-metre sample is weighed against the theoretical weight. Bundle strapping and tag legibility are checked, and the result is recorded in an inspection report with photographs.
Applications
- raft foundations and pile caps
- cast-in-place frames of residential and industrial buildings
- floor slabs and precast concrete units
- welded reinforcement cages and meshes
- bridge and road structures
- tanks and retaining walls
Packing and shipment
Bundles of 2–3 t strapped with steel band at four to six points, mill tag with grade, diameter, heat number and weight; small diameters in coils.
Grade equivalents
Equivalents are the nearest, not identical: the exact grade and standard are written into the contract.
| GOST | GB (China) | ASTM | EN | Note |
|---|---|---|---|---|
| A240 (GOST 34028), A-I (GOST 5781) | GB (China)HPB300 (GB/T 1499.1) | ASTMGrade 40 [280] | EN— | NotePlain round bar. Yield strengths differ: 240, 300 and 280 N/mm². |
| A400 (GOST 34028) | GB (China)HRB400 / HRB400E | ASTMGrade 60 [420] | EN— | NoteNearest equivalents by yield strength of 400–420 N/mm². Grade 60 under ASTM A615 is not intended for welding. |
| A-III / A400 (GOST 5781, 25G2S, 35GS) | GB (China)HRB400 / HRB400E | ASTMGrade 60 [420] | EN— | NoteNearest equivalent. Steel 35GS has limited weldability; HRB400 is rolled from microalloyed steel with a carbon equivalent of up to 0.54 %. The GOST 5781 rib pattern is herringbone, the GB pattern is crescent. |
| A500C (GOST 34028) | GB (China)HRB500 / HRB500E | ASTMGrade 75 [520] | ENB500B | NoteB500B (BS 4449, DIN 488 within EN 10080) is the equivalent by yield strength of 500 N/mm²; HRB500E and Grade 75 are the nearest equivalents. A500C is weldable, carbon equivalent up to 0.52 %. |
| A500C (GOST 34028) | GB (China)HRB400E | ASTMGrade 60 [420] | ENB500B | NoteReplacing A500C with HRB400E lowers the design strength and requires the reinforcement to be recalculated — only with the structural designer's approval. |
| A600 (GOST 34028) | GB (China)HRB600 | ASTMGrade 80 [550] | EN— | NoteNearest equivalents: yield strength 600, 600 and 550 N/mm². |
Equivalents are the closest match, not identical: chemistry and tolerances differ between standards. The exact grade and standard are written into the contract.
The batch is checked against the order at the mill before shipment: sizes, markings, heat numbers on the certificate and tags, packing
Documents
What arrives with the steel
01
Mill test certificate (MTC)
Heat number, chemical composition, mechanical properties and standard for every heat in the batch.
02
Photo-documented inspection report
Measurements, markings, packing, weighing and bundle numbers, drawn up at the mill before shipment.
03
Specification and packing list
Items, sizes, quantities and mass by bundle: what the warehouse acceptance is checked against.
04
Certificate of origin
Confirms the mill and country of manufacture for customs clearance.
Related items
HRB500E · Ø6–50 · 9–12 m · GB/T 1499.2-2018
HRB500E rebar
Hot-rolled seismic grade 500 rebar to GB/T 1499.2-2018, Ø6–50 mm, the nearest equivalent of A500C
HRB400E · Ø6–50 · 9–12 m · GB/T 1499.2-2018
HRB400E rebar
Hot-rolled seismic grade 400 rebar to GB/T 1499.2-2018, Ø6–50 mm, the standard product of mills in China
Buyer questions
How to read a mill test certificate (MTC) for rebar
The certificate states the standard and grade, diameter, heat number, chemical composition of the heat with the carbon equivalent, tensile test results (yield strength, tensile strength, elongation) and bend test results, weight and number of bundles. The heat number on the certificate is checked against the tag on every bundle and the rolled-in marking on the bar — this is the link between the document and the metal. The bureau's inspector makes this check at the mill before shipment and attaches the certificate to the inspection report.
How A500C differs from A400 (A-III) and from HRB400E
By yield strength and by how the strength is obtained. A400 under GOST 5781 is hot-rolled from low-alloy steel 25G2S or 35GS, yield strength from 390 N/mm², herringbone rib pattern. A500C under GOST 34028 is as a rule thermomechanically strengthened low-carbon steel, yield strength from 500 N/mm², weldable, crescent rib pattern. HRB400E under GB/T 1499.2 is hot-rolled microalloyed steel, yield strength from 400 N/mm², with seismic ductility requirements. The grade for a project is set by the structural designer; the bureau selects a mill for the specified grade.
How the tonnage of a batch is calculated
A specification in metres is converted to tonnes by theoretical weight: the weight per metre equals 0.006165·d², where d is the nominal diameter in millimetres. The weight tables on the product pages are built on this formula at a steel density of 7.85 g/cm³. Shipment and acceptance are by actual weight as recorded on the mill's certificate and packing list; the deviation of actual weight from theoretical is limited by the tolerance of the standard.
What the bureau's inspector checks at the mill before shipment
That the batch matches the order by standard, grade and diameters; nominal diameter and rib height with a calliper and a micrometer, the weight of a one-metre sample on scales; the rolled-in marking on the bar and the tag on the bundle — grade, diameter, heat, mill; the mill test certificate for every heat; packing and strapping of bundles. The result is an inspection report with photographs. Rejects recorded in the report are replaced — the replacement is supplied by the mill under its contract with the bureau.
What the minimum batch is and whether several diameters can be combined in one shipment
The batch is sized to your volume — send a specification with grade, diameters, lengths and quantity for each item. Several diameters of one grade are collected at one mill into one shipment; where standards or grades differ, the bureau selects a mill that rolls all the required items or consolidates the shipment from two mills.
Price request
Send your specification and we will quote your batch
Price depends on grade, size, tonnage and delivery terms on the day of contract.
Request received